Mirror ABIs: which ABIs does the lululemon Mirror's userspace run?
Status (2026-11-13): read from the community image, untested on a stock unit. The Glass Panes
community image for the Mirror runs a 64-bit userspace with 32-bit support:
arm64-v8a,armeabi-v7a,armeabi. Nobody has read the stock software's ABI list yet.
Device: lululemon Mirror (Qualcomm MSM8916), Android 6.0.1. Image: Glass Panes mirror-android-1.
Question
frames/lululemon-mirror/design/frame.json declares abis: the ABIs the device's userspace runs
(#98). The release builds one APK for every ABI any frame lists, so the value matters. MSM8916 is a
64-bit SoC (Cortex-A53), but a vendor can still ship a 32-bit userspace on it, as Allwinner did on the
S1's A133.
What we tried
-
Read
ro.product.cpu.abilistfrom the community image (2026-11-12, read). This is from the research for #40, posted in that issue. The steps, as that comment describes them:- Download
system.imgfrom the Glass Panesmirror-android-1release (published 2026-11-05, 850,905,808 bytes). - Check it against the release's
SHA256SUMS: it matched. - Convert it to raw ext4, and list it read-only with
debugfsin a Debian container. Nothing was mounted, and nothing from the image is in this repo.
It found
ro.product.cpu.abilist=arm64-v8a,armeabi-v7a,armeabi.That rules out a 32-bit-only userspace for this image. It says nothing about the stock software.
- Download
Result
| Software | ro.product.cpu.abilist |
How sure |
|---|---|---|
Glass Panes mirror-android-1 |
arm64-v8a,armeabi-v7a,armeabi |
read from its system.img (2026-11-12) |
| Stock Mirror software | unknown | untested |
So frame.json lists arm64-v8a, then armeabi-v7a (we build no armeabi APK). If a stock unit
turns out to be 32-bit only, the Mirror's list drops arm64-v8a. The release's ABIs stay the same,
because generic-android lists both.
How to reproduce
Read-only. The commands below are a guide; they are not the exact ones run on 2026-11-12.
- Download
system.imgandSHA256SUMSfrom themirror-android-1release and check the hash. simg2img system.img system.rawif the image is sparse.debugfs -R 'cat /build.prop' system.raw | grep abilist.
On a Mirror with adb: adb shell getprop ro.product.cpu.abilist.
Open questions
- The stock software's
ro.product.cpu.abilist. Read it with adb on a stock unit, if stock adb is usable (also open in #40).