lululemon Studio Mirror
A 40-inch mirror with Android behind it. A full-length mirror with a 40-inch portrait screen behind it. The original version takes a new Android image over fastboot. Originally sold as Mirror, by Mirror.co.
A Glassworks frame: the device definition for the lululemon Studio Mirror. Its data is in design/frame.json (format: frames/README.md), and glassworks.dev/frames/lululemon-mirror shows it.
Credits
This frame stands on other people's work. Glassworks adds its app to the Mirror; making the Mirror run Android in the first place was theirs. Thank you.
- The Android image: Glass Panes, by
git-nimrod. The Mirror runs their Android 6.0.1 image, release
mirror-android-1. In their words: "Ready-made system.img and userdata.sparse for the Lululemon Studio mirror (board MIR63A0-00-P1, revision RevP21), so you can put Android on your mirror by flashing two files." Kiln fetches it from their GitHub release through Refract, our download proxy, which passes it through without storing it. The project's code is MIT; the image's Android and kernel source keep their own licences, and its vendor files belong to Qualcomm and Quectel. Glass Panes credits, in turn: "This build stands on the work of the Lululemon-mirror community. Thank you to Onemoremichael, lrinQVQ, TimStewartJ, repairman29, porcuswine, vgab7 and everyone in the mirror-repurposing community." - Research: lululemon-mirror-repurpose, by repairman29 (Apache-2.0). Which boards run Android 6.0.1, why the later NXP revisions differ, and the limits of the boot chain (revisions.md, mirror-android.md).
- Research: lulu-mirror-software-only, by Onemoremichael. The stock kernel's config, the research on the NXP revisions, and why size and year don't identify a board (same notes).
- Research: mirror, by olm3ca. The move from 40-inch to 43-inch panels (revisions.md).
- Teardown: Smart Mirror Teardown, by MDME. The chips inside: the SoC, Wi-Fi and Bluetooth, audio and camera (mirror-android.md).
The same list is in design/frame.json (credits), which glassworks.dev and
Kiln show (how).
Status
Status: planned. Nothing installs on it yet. The target is the Qualcomm (MSM8916) board with stock software 1.x. Later revisions use an NXP i.MX8 board, where only hardware-assisted (JTAG) access has been reported; they are not a target. Screen size doesn't tell them apart (revisions.md).
The original version runs Android 6.0.1, and S1 Kiosk needs Android 8.0 or newer (minSdk 26), so today's app doesn't install on it. Why a newer Android is hard on this board: mirror-android.md.
The Clarity badge shows its Clarity grade (docs/perf.md) once one is published; none is yet.
Hardware
| Size | About 1336 × 536 × 43 mm (40-inch version, from reviews) |
| SoC | Qualcomm MSM8916 |
| Android | 6.0.1 (stock software 1.x) |
| Screen | 40-inch 1080p, portrait, behind a two-way mirror |
| Presence | 5 MP front camera |
| Audio | Microphone and stereo speakers |
| Mount | Leans on the wall on its stand, or mounts flat on the wall |
Install
Not available yet. As planned, it installs by flashing system and userdata over fastboot from a computer, not from Kiln.
That erases lululemon's software for good. There is no way to back up the stock image first, so there is no way back.
Check before flashing: fastboot must report MSM8916 and the expected partition sizes. If anything differs, stop.
Test only, today: on a Mirror that already runs the community image, Kiln can install S1 Kiosk's legacy build over adb, from an APK file on your computer: /lululemon-mirror?apk=local (its recipe). It changes nothing else on the Mirror. Making S1 Kiosk the home screen needs a choice on the Mirror, in Android's list of home screens: S1 Kiosk, then Always (home-app.md). On an update where another app is still kept as the home screen, Kiln opens that app's settings first: choose Clear defaults. Undo removes the app and shows the same list again: choose the home app you had before, then Always. The Mirror has no touchscreen, so use a USB mouse (or scrcpy). None of this has run on a real Mirror yet, undo included.
Panes
| Pane | Support | Note |
|---|---|---|
| Assist | Planned | It has a microphone. |
| Timers | Planned | Needs Assist. |
| Sendspin | Planned | It has stereo speakers. |
| Zigbee and Thread radio | No | No Zigbee or Thread radio. |
| Time zone | No | Worked out: only on the S1 (aqara-s1-plus). |
| Diagnostics | Planned | Worked out: needs no special hardware. |
| Bluetooth proxy | Planned | Worked out: has Bluetooth LE (its WCN3660B, read from a teardown). |
| Notifications | Planned | Worked out: needs no special hardware. |
| Camera | Planned | Worked out: has a camera (5 MP, front). |
| Wall base | No | S1 only. |
"Worked out" means frame.json doesn't rate the pane; its support comes from what the pane needs and what the frame has (how).
Research notes
What we found on this device, and how (all notes):
- mirror-android.md: Can the lululemon Mirror run Android 8+ for the current GeckoView? The signed boot image blocks it; the kexec idea, the paths, blobs and read-only probes (desk research, #39)
- revisions.md: Which Mirror revisions are a target: the later NXP i.MX8 revisions, and why screen size doesn't identify it (read, no hardware)
- mirror-abis.md: Which ABIs the Mirror's userspace runs: 64-bit in the community image, stock untested (#98)
- home-app.md: How adb without root makes S1 Kiosk the home screen on Android 6: no
cmd, so Android's chooser and an Always tap (read-only, 2026-11-15) - community-image-terms.md: May Kiln download and modify the community system image? No licence for its vendor binaries, no CORS; open (#40)
Files
design/frame.json: the catalog data and the 3D model, and the boot branding's targetresearch/: the notes above