Legal notes
On this page
What S1 Unleashed does and doesn't do, stated as facts about the project. This is not legal advice, and the rules differ from country to country.
Scope: your own device
S1 Unleashed changes the software on an Aqara Panel Hub S1 Plus that you own. The installer works on the panel connected to your computer over USB. Before it writes anything, it saves a backup of the partitions it changes, and that backup stays with you. Undo a previous install writes it back (install.md). Changing the panel's software probably voids its warranty.
No copy protection is bypassed
The panel's own boot log shows that secure boot is not enabled and that no root-of-trust key (ROTPK) was ever fused into the chip (frames/aqara-s1-plus/research/findings.md). So the chip's mask-ROM recovery mode, FEL, accepts unsigned code. It asks for no signature, key or password. The installer uses FEL as it is meant to be used: it loads U-Boot, built from source, into RAM (frames/aqara-s1-plus/research/fel.md).
The install doesn't break or extract any keys and doesn't decrypt anything. To boot the patched boot
image, it sets the "verification disabled" flag in the panel's own vbmeta partition. That is a
standard Android Verified Boot setting. On this panel AVB is not enforced by the hardware, because
secure boot is off. Your backup holds the original vbmeta.
Bring your own firmware
The project doesn't distribute Aqara software. The installer patches the boot image already on your
panel, in your browser, using Magisk and the project's own files. Aqara's system, apps, radio daemon
(cpcd) and stock radio firmware stay on the panel and are used where they are.
Silicon Labs' Zigbee stack, zigbeed, is not distributed either. When you choose that stack, the panel
downloads it from Silicon Labs' own GitHub release and checks its SHA-256. The radio bundle and the APK
are checked so that they never contain it.
Some Silicon Labs code does ship, though: the client library libcpc (from Silicon Labs' public
cpc-daemon source, under Silicon Labs' MSLA) and a Zlib-licensed interface file. They are built into
otbr-agent, and the radio bundle has a copy of libcpc for zigbeed. They are there to talk to the
panel's own Silicon Labs radio. THIRD-PARTY-NOTICES.md
lists them.
Trademarks
S1 Unleashed is not affiliated with, endorsed by or sponsored by Aqara or Lumi United Technology. "Aqara", "Panel Hub S1 Plus" and the other product names are trademarks of their owners. They are used here only to say which device the project works with. The same applies to Silicon Labs, Home Assistant and other names mentioned in this project.
Licences
The project's own code is MIT (LICENSE). Third-party code keeps its own licence. THIRD-PARTY-NOTICES.md lists everything the APK and the installer ship, with its licence and where its source is. The licence texts are in LICENSES/. On the panel, they are under Open source licences in the hidden settings: tap the top-left corner five times.