Samsung Galaxy Tab A 10.1 (2016)
A tested tablet running Glassworks for Generic Android on LineageOS Tested by the community. No root or device-specific code required.
On this page
The Samsung Galaxy Tab A 10.1 (2016), model SM-T580, is a tested device that runs Glassworks for Generic Android as it is, with no device-specific code. Its catalog profile lives in design/frame.json (see frames/README.md) and is published at glassworks.dev/frames/samsung-galaxy-tab-a-10-1-2016.
Status
Tested by the community on LineageOS. Someone in the community flashed their tablet with an unofficial 64-bit LineageOS build, then installed Glassworks with Kiln, and it has run without issues so far (read the report). LineageOS doesn't list this tablet among its official devices, so the build comes from the community too.
Samsung's own Android 8.1 on this tablet runs 32-bit apps only, and nobody has tested Glassworks on it yet. If you try it, a device report helps the next person.
To install, plug the tablet in over USB and open kiln.glassworks.dev/android in Chrome or Edge, or sideload the APK (Generic Android install guide). Kiln knows the tablet by its model, SM-T580, which LineageOS keeps.
Clarity hasn't measured it yet.
Hardware
From published specifications. Nothing here has been read from a unit by Glassworks yet:
| Specification | Details |
|---|---|
| Dimensions | 254.2 × 155.3 × 8.2 mm, 525 g |
| Processor | Samsung Exynos 7870, eight Cortex-A53 cores at 1.6 GHz |
| Memory | 2 GB |
| Android | 6.0.1 at launch (2016), updated by Samsung to 8.1 (32-bit apps only). Tested on LineageOS, 64-bit (arm64-v8a) |
| Display | 10.1-inch, 1920 × 1200 |
| Root | Not required |
Preview render
The preview image in design/render.webp shows the showcase dashboard at the tablet's full 1920 × 1200 resolution, drawn by tools/showcase/render.mjs. It matches Generic Android's render, which is drawn at the same size.